- 学位論文一覧
- 博士(学術)
博士(学術)
Update Date (<span class="translation_missing" title="translation missing: en.view.desc">Desc</span>)
The COVID-19 pandemic has significantly transformed higher education, shifting it from traditional classrooms to online platforms. This change requires reassessment and adaptation of educational methods, particularly student assessment. Online formative assessments have become essential for improving teaching and learning outcomes because they provide immediate feedback, enable interactive support, and encourage selfassessment, thereby playing a key role in the learning process.
The multiple-choice test is widely used to assess students. However, the inherent nature of multiple-choice questions poses the risk of obtaining correct answers, even without a genuine understanding of the content. To mitigate this issue, typical measures involve increasing the number of questions. To address this concern, this study implemented a new constraint aimed at enhancing the inherent characteristics of the multiple-choice format. This research objective focuses on investigating innovative scoring methods for formative assessments in online courses that can improve learning in higher education within the context of Yamaguchi University.
This study evaluated the effectiveness of this learning assessment method by employing multiple-choice questions, presenting a practical and efficient approach for online formative learning assessment designed to assess a large student cohort. The new scoring method in this study extends Ikebururo's concepts that introduce partial scoring systems in MCQ design, driving the creation of a new scoring system centered on the "degree of matching. This approach involved comparing the alignment between student responses and the instructor's design, resulting in a detailed five-level scoring system for four-choice questions. This scoring method hinges on evaluating how closely students answers align with the instructor's intended choices. Each question, with its four choices, is akin to a binary process, represented by a 4-digit binary number. Each digit in this comparison corresponds to a specific choice, allowing for a granular assessment of the match between student selection and the ideal answer. This innovative approach steps away from the conventional pass-fail binary system, offering a spectrum of evaluation outcomes. It provides a better understanding of students comprehension by gauging the extent of the alignment between their choices and the instructor's design.
This method can enhance assessment accuracy by capturing the subtleties of student responses beyond mere correctness, earning partial points for partial knowledge or progress via multistep reasoning, promoting critical thinking, recognizing the importance of incremental progress, and capturing the depth of a respondent's knowledge.
Initially, an extensive literature review established a theoretical framework, identifying gaps in the current understanding of online formative assessments. Subsequently, the study examined data collected from graduate students in the 'Advanced Research and Development Strategies' course at Yamaguchi University. The data span two academic years, 2019 and 2020, and provide a comparative view of face-to-face and online Lecturer Formats.
Furthermore, the k-means clustering algorithm was used to analyze student performance using formative assessment scores. This method categorizes student performance into distinct clusters, revealing insights into individual learning behaviors. The k-means method, a popular technique in data mining and pattern recognition, efficiently groups data into 'k' clusters. It is effective for large datasets and versatile across various data types. The technique involves steps such as initialization, assignment, centroid updating, and convergence checking, and is instrumental in identifying performance patterns, enabling the development of more focused educational strategies.
The results demonstrate the potential of the four-choice multiple-choice scoring method to revitalize online formative assessments. The key contributions of this study are as follows:
・Innovative Scoring Method: This study shows how the four-choice method can lead to more dynamic and engaging online assessments. This approach captures student performance more accurately and encourages deeper engagement with the material.
・Enhanced Student Engagement and Understanding: The new four-multiple-choice scoring method significantly affected student engagement and understanding. This fosters an environment in which students are more actively involved in their learning processes, contributing to better comprehension and retention of material.
・Practical Implications for Educators and Institutions: The need to adapt assessment strategies for digital learning, focusing on continuous feedback and personalized learning.
・Educational Technology Contribution: Key insights into adapting assessment strategies for digital learning, emphasizing continuous feedback, and personalized learning.
This dissertation presents a comprehensive examination of new assessment techniques in the context of online learning. This provides a critical roadmap for educators and institutions to adapt to the digital educational environment for more effective and engaging assessment practices in online higher education.
Creators :
SONEPHACHANH MALAYPHONE
Dissertation Number : 創科博甲第132号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
In the dynamic global business landscape, finance and innovation stand as the twin pillars of corporate success. Both finance and innovation are vital for a company's long-term viability, demanding a harmonious interplay between prudent financial management and a culture that fosters innovation. Research in the field examining the relationship between a firm's finance and innovation is rapidly growing, offering profound insights into the dynamics shaping organizational success. While many empirical studies traditionally presumed that financial support drives innovative efforts, alternative perspectives support the reverse causation hypothesis, suggesting that innovation can stimulate financial performance. The current corporate management research often takes a segmented approach, focusing on either the signaling effect of innovation on financial performance or the influence of finance on innovation performance. While insightful, this segmented approach resembles examining separate puzzle pieces without considering the whole picture.
We contend that finance and innovation are mutually interdependent, influencing each other. Our study uniquely explores both dimensions, investigating how financial resources stimulate innovation, and how innovation, primarily represented by patents, attracts investors and secures financial support. Focusing on Japanese corporations, our research provides a distinctive perspective due to Japan's diverse business landscape, strong patent system, and commitment to innovation. Japan's risk-averse market and global competition highlight the importance of innovation and the role of patents as signals for economic growth.
The first study scrutinizes the intricate relationship between financial resources and firms' innovation outputs, exploring the influence of various financing sources, internal and external, inspired by the Pecking Order Theory. It involves a sample of 113 Japanese manufacturing firms listed on the JASDAQ market, using patent-based metrics to gauge technological innovation. The study highlights the crucial roles played by both internal and external financial resources in driving innovation outputs. Firms demonstrate a strong preference for self-generated financing, particularly internal funding. Additionally, the research unveils the complementary impact of debt financing, especially when internal resources are depleted, aligning with the Pecking Order Theory's risk principles.
In our second study, we explore the reverse causation between innovation and finance, particularly during initial public offerings (IPOs). IPOs are pivotal, as they provide capital for growth and enhance a firm's reputation. However, information asymmetry poses a challenge, leading investors to rely on quality signals. We hypothesize that patents, as a proxy for innovation, mitigate information asymmetry because their information is verifiable, observable, and entails maintenance costs. Thus, a company with numerous patents before an IPO is likely to gain investor trust, leading to a more successful IPO. We analyze 338 newly listed Japanese firms across various industries, finding robust positive correlations between pre-IPO patent applications and IPO financial performance. This contribution enriches the literature on the impact of patents on IPO performance and illuminates the broader influence of innovation on finance.
The third study delves into the dynamics of patent signaling within IPO firms, distinguishing between high-tech and low-tech sectors. High-tech firms often face more information asymmetry, with less transparency in R&D and patent disclosures, making them riskier for investors. Low- tech firms, with valuable patents and balanced resource allocation, are more accessible to investors. This raises the question of whether high-tech firms are less successful in using patent signals to raise total capital during the IPO process, as previous research has mainly focused on high-tech firms in technology-intensive markets. While prior studies often grouped all IPOs together or concentrated on specific industries, our study adds fresh insights to the entrepreneurship and innovation landscape by asserting that patents exert a more substantial influence on IPO success for low-tech companies in comparison to their high-tech counterparts. This observation underscores the necessity for an in-depth exploration of the patent signaling mechanism in IPOs, especially for low-tech firms characterized by simpler innovation portfolios and tangible assets appealing to risk-averse investors.
Overall, our dissertation offers a comprehensive exploration of the interplay between finance and innovation in Japanese corporations, providing nuanced insights into the implications of this symbiotic relationship for businesses, policymakers, and scholars worldwide.
Creators :
LE THUY NGOC AN
Dissertation Number : 創科博甲第134号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
製品にはプロダクトライフサイクルがあり,その段階ごとに要求される開発内容も変化するため,市場における製品のイノベーションの状態を把握することが重要である. また,ドミナントデザイン発現前に製品を市場に投入することは,製品が広く受け入れられるための有効な手段の一つであるといわれている. しかし,ドミナントデザイン発現時期は,事後にしかわからないという問題があり,その対策として,特許情報を使った手法が多くの研究者によって検討されているが,製品に関する技術の専門家が必要であることが課題である. 例えば,分析に使う特許分類コードや技術の専門用語が特定できないことである. 特許情報を使った先行研究では,特許分類コードを使った方法,テキストマイニングを使った方法,機械学習・ディープラーニングを使った方法があるが,製品に関する技術の専門家の知見が必要とされている.そこで,製品に関する技術の専門家の判断によらず,イノベーションの状態変化,ドミナントデザインの発現時期を得る方法に対する社会的要求がある.
本研究では,製品に関する技術の専門家の判断によらず,日本の特許情報と分類コードのFタームを使い,ドミナントデザインの発現時期を得る新たな手法を提案した.また,分析手法の有用性の検証として,製品の開発事例を元に,ドミナントデザインの発現時期を示すことができることを確認した.ここで,検証には,組み立てて完成する製品で,精密機器・装置分野の製品であり,かつFタームが付与されているものを対象とした.
本論文は,以下の4章から成る.
1章では,研究の背景を述べ,先行研究の調査を行った. 先行研究の課題を認識し,取り組む課題を考え,本研究の目的を定めた. さらに,本論文の構成のアウトラインを示した.
2章では,製品に関する技術の専門家の判断によらず,Fタームを使い,イノベーションの状態変化,ドミナントデザイン発現時期を捉える新たな手法を提案した. 提案した新たな手法では,まず,分析対象の製品に関する特許を選定するために,特許分類コードのFIを特定する必要がある.FIを特定する手法の検討では,カメラを対象とし,製品を表す一般的な単語からFIを求めることができることを示した.また同時に,コア技術を表す特許分類コードを顧客の声から特定するため,日本の農業用草刈り機メーカーを分析し,コア技術を表すテーマコードが特定できることを示した.つぎに,イノベーションの状態変化とドミナントデザインの発現時期を得る手法を確認するために,先のそれぞれの結果及びFタームを用いて,製品に関するFIから,Fタームを特定し,Fタームから,イノベーションの状態変化を求めた.求めたイノベーションの状態変化から,AbernathyとUtterbackが提唱したA-Uモデルの条件を適用し,ドミナントデザインの発現時期を特定できることを示した.また,インクジェットプリンタ,NC加工機,プロジェクタについて分析し,ドミナントデザイン発現時期を求め,製品のドミナントデザイン時期と比較した結果も示している.
3章では,2章で示した,新たな手法の有用性を検証した.有用性の検証は,製品開発に成功した日本企業を事例として分析し,2章で得た結果と比較した.この分析企業は,日本の業務用可食インクジェットプリンタ市場において,最も早く製品を投入した企業の一つであり,市場においてトップシェアを獲得している.製品開発の歴史と,ドミナントデザイン発現時期の分析結果を比較し,製品開発に着手したタイミング,製品を市場へ投入するタイミングは,ドミナントデザインの発現時期の前であることを示した.このことから,本研究で提案する手法は,製品開発において,製品を市場へ投入するタイミングを判断する際に有用であることを確認した.さらに,製品開発においては,ドミナントデザイン発現時期を鑑みた製品を市場へ投入するタイミングだけではなく,ターゲット選定,独自性や品質を実現する技術開発も重要であるため,事例でとりあげた企業の事業戦略,実行計画についても調査した.事例企業は,製品を市場へ投入するタイミングを定め,目標時期までにターゲット選定,製品の独自性を実現するための課題認識,課題解決のための技術開発を,戦略的,計画的に実施しており,このことからも,本研究で提案した新たな手法は,事業戦略において,製品を市場へ投入するタイミングを決定することに活用できることを示唆している.
4章では,2,3章を総括した. 2章,3章の成果をまとめ,本研究で新たに提案した特許情報と日本の特許分類コードのFタームを使った特許分析手法は,組み立てて完成する製品で,精密機器・装置分野の製品であり,かつFタームが付与されている製品において,製品に関する技術の専門家の判断によらずドミナントデザインの発現時期を特定できることを示し,企業の製品開発事例の検証から,提案した新たな手法の有用性を示唆している.また,本研究の限界と今後の展望,さらに,その実現のために取り組むべき課題を述べた.
Creators :
石井 好恵
Dissertation Number : 創科博甲第135号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Reinforced Concrete (RC) has been extensively used in the construction of buildings and infrastructure facilities. Particularly, RC bridge piers have been widely utilized in the construction of highways, mountainous, and river elevated bridges due to their cost-effectiveness, ease of construction, durability, seismic resistance, and corrosion resistance. In the design and construction of bridge piers, the bond performance between reinforcement and concrete is crucial. Ensuring sufficient bond strength between the materials is essential for reliable stress transmission. In most RC structures, deterioration of bond strength between reinforcement and concrete in column boundaries and within footings leads to slippage phenomena, reducing the column’s load-bearing capacity and rigidity, resulting in a decrease in the seismic performance of RC structures.
Previous studies have shown that the diameter and arrangement of axial bars significantly affect the bond performance at the joint. Therefore, in bridge piers with densely arranged small-diameter axial bars, the bond between axial bars and footing concrete may be lost due to decreased anchorage performance, possibly changing the failure mode from flexural failure, as assumed in current designs, to a failure mode caused by rocking deformation.
In this study, considering the above background, cyclic loading tests and finite element analysis based on reduced-scale RC column models, consisting of different diameters and numbers of axial bars with similar reinforcement ratios and strengths, were conducted. Through these, the influence of bond-slip phenomena in RC bridge piers with densely arranged small-diameter axial bars on the seismic reinforcement performance of RC columns was investigated. The structure of this paper is described below.
In Chapter 2, cyclic loading tests using RC column specimens with densely arranged small-diameter axial bars, having similar reinforcement ratios and strengths compared to the standard reduced-scale RC bridge pier models commonly used in previous studies, were conducted. The influence of small-diameter axial bars on the deformation and load-bearing performance and failure mechanisms of RC columns was compared with standard specimens. Specifically, analyses and considerations were made regarding the strain history of axial bars at loading stages, load-strain relationship history, damage conditions of reinforcements inside the specimens, and rotational deformation behaviors calculated from vertical displacements on both sides of the column base.
In Chapter 3, reproduction analysis of cyclic loading tests based on nonlinear finite element methods was conducted. It was clarified that it is necessary to consider the bond between axial bars and concrete. A new modeling method to reproduce the bond-slip phenomena between axial bars and concrete in RC columns was proposed. In these numerical analysis methods, focusing on the bond-slip behavior of reinforcements at the joint and differences in bond failure characteristics caused by different reinforcement arrangements, detailed analyses were conducted on how they affect the overall deformation and load-bearing performance of RC columns. From these analyses and considerations, the performance and failure mechanisms of RC columns with densely arranged small-diameter axial bars were summarized.
In Chapter 4, the possibility of seismic reinforcement for RC columns with small-diameter axial bars was verified. Even now, various reinforcement works are being conducted for existing transportation infrastructure facilities for reasons such as improving the seismic performance of RC bridge piers, extending the life of aging structures, and taking measures against imminent heavy rain disasters. In the case of existing RC bridge piers designed and constructed based on old seismic standards, many of them use smaller diameter axial bars compared to current standards and do not have sufficient flexural strength. Also, in reinforcement, it is necessary to select a construction method that comprehensively considers seismic resistance, durability, workability, and economy. Especially when applying to river piers, it is necessary to smoothly construct within a limited construction period, and in some cases, a reinforcement method with a thin wrapping thickness is chosen to reduce the riverbed occupancy rate and maintain its performance for a long time. Since it is unclear whether the reinforcement effect can be sufficiently expected even if reinforcement is performed, cyclic loading tests were conducted on specimens reinforced with PCM materials for RC columns with insufficient deformation performance due to such reinforcements and anchorage conditions, and the load-bearing deformation performance was evaluated. Detailed verification was conducted focusing on the suppression effect of anchorage failure of axial bars and rotational deformation in the plastic hinge section caused by bond failure. It was clarified that the high-strength PCM material pouring reinforcement method can suppress the anchorage failure of existing part reinforcements and the rocking deformation of the existing part.
In Chapter 5, verification based on nonlinear finite element methods was conducted on the specimens reinforced in the previous chapter, focusing on the suppression effect of anchorage failure of axial bars in the existing part and rocking deformation due to the wrapping reinforcement of PCM materials targeted in cyclic loading tests. By appropriately modeling the PCM reinforced part and the reinforced part reinforcements, it was possible to reproduce the pinching phenomena observed in the unloading and reloading history of cyclic loading tests, and it was clarified that the rocking deformation of the plastic hinge part caused by bond failure at the base of the specimen could also be suppressed.
Finally, the conclusions of each chapter were summarized, and a comprehensive summary of the research results on the seismic reinforcement performance of RC bridge piers with densely arranged small-diameter axial bars focusing on bond-slip behavior was conducted. Also, unresolved issues in this study were raised, and descriptions were made regarding future research issues.
Creators :
SHAO PEILUN
Dissertation Number : 創科博甲第142号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
森永 明日香
Dissertation Number : 創科博甲第146号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
英 庄园
Dissertation Number : 東アジア博甲第168号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
Tong Zhihui
Dissertation Number : 東アジア博甲第169号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
This dissertation aims to explore the adoption of fintech to improve the efficiency, stability, and social impact of microfinance institutions (MFIs) for financial inclusion in Laos. In Chapter 2, we delve into the current state of financial inclusion in Laos and identify the primary barriers and challenges obstructing its progress. Additionally, we analyze the role of MFIs in advancing financial inclusion within the country. In Chapter 3, we examine MFI performance and credit default risk using CAMEL rating systems, allowing us to gain a comprehensive understanding of their financial health when extending loans to underserved populations. The findings highlight the importance of MFIs' risk management and financial stability in advancing greater financial inclusion.
Chapter 4 concentrates on the role of fintech, exploring its potential benefits and risks for enhancing the efficiency, stability, and social impact of MFIs in promoting financial inclusion in Laos. This study establishes the groundwork for fostering more inclusive and sustainable financial practices in the country. Furthermore, it emphasizes the necessity of addressing fintech-related risks as well as balancing the relationship and transaction banking to fully maximize its potential for MFIs seeking to enhance their efficiency, stability, and social impact through fintech adoption.
To understand the factors that affect fintech adoption in MFIs, we develop a theoretical model in Chapter 5 by extending the Technology Acceptance Model (TAM) with perceived risk, government support, and regulation. Surveying managing directors from MFIs provides useful data, and the effectiveness of the extended TAM is validated through Structured Equation Modeling (SEM). This study contributes to theoretical development by enriching TAM with additional variables. Applied this extended model in the context of MFIs in Laos, it provides a more comprehensive understanding of fintech adoption, strengthening TAM's credibility, and contributing to a robust theoretical framework for fintech adoption within the scope of MFIs. Consequently, our study provides practical guidance for practitioners seeking to strengthen influential factors and overcome obstacles in the fintech adoption of MFIs.
Through an examination of the situation of financial inclusion in Laos, the role of MFIs in driving financial inclusion, their performance, credit default risk, and fintech adoption, this dissertation demonstrates the potential of fintech and its role in improving the efficiency, stability, and social impact of MFIs for financial inclusion in Laos. Ultimately, it may contribute to the advancement of the country's financial ecosystem and support societal progress.
Creators :
SOMESANOOK PHONGSOUNTHONE
Dissertation Number : 東アジア博甲第170号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
An Zhenyu
Dissertation Number : 東アジア博甲第171号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
Zhao Shujuan
Dissertation Number : 東アジア博甲第172号
Degree Names : 博士(学術)
Date Granted : 2024-03-18
Degree Grantors :
Yamaguchi University
Creators :
高橋 幹弘
Dissertation Number : 創科博甲第128号
Degree Names : 博士(学術)
Date Granted : 2024-03-04
Degree Grantors :
Yamaguchi University
Creators :
有井 賢次
Dissertation Number : 創科博乙第10号
Degree Names : 博士(学術)
Date Granted : 2024-03-04
Degree Grantors :
Yamaguchi University
Creators :
Sarikavak Yasin
Dissertation Number : 創科博乙第8号
Degree Names : 博士(学術)
Date Granted : 2023-03-03
Degree Grantors :
Yamaguchi University
Creators :
寺田 直樹
Dissertation Number : 創科博甲第62号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Jiang Yuxuan
Dissertation Number : 東アジア博甲第141号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Meng Fanhong
Dissertation Number : 東アジア博甲第142号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Liu Chuanxia
Dissertation Number : 東アジア博甲第143号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Guo Ruiqi
Dissertation Number : 東アジア博甲第144号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Nyoman Satyayudha Dananjaya
Dissertation Number : 東アジア博甲第145号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Putu Ayu Asty Senja Pratiwi
Dissertation Number : 東アジア博甲第146号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Wu Biao
Dissertation Number : 東アジア博甲第147号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Yin Guopeng
Dissertation Number : 東アジア博甲第148号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
若杉 祥太
Dissertation Number : 東アジア博甲第149号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Creators :
Do Thi Van
Dissertation Number : 東アジア博甲第151号
Degree Names : 博士(学術)
Date Granted : 2021-09-27
Degree Grantors :
Yamaguchi University
Creators :
Abdul Haris Setiawan
Dissertation Number : 東アジア博甲第150号
Degree Names : 博士(学術)
Date Granted : 2021-09-27
Degree Grantors :
Yamaguchi University
Creators :
Md. Istiaq Obaidi Tanvir
Dissertation Number : 創科博甲第71号
Degree Names : 博士(学術)
Date Granted : 2021-09-27
Degree Grantors :
Yamaguchi University
The development and implementation of industrial policy are essential in shaping a country’s economic landscape. It promotes industrialization, which, in turn, generates employment opportunities, enhances productivity, and diversifies the economy. the present dissertation studies the subject of industrial policy, with a particular emphasis on resource allocation and computable general equilibrium in Ghana.
Chapter 2 delves into the concept of industrial policy and its implementation in Africa in general, and Ghana, in particular. First, we examine Ghana’s past experience with industrial policy implementation and the reasons for its inability to attain the desired outcomes. Subsequently, in response to the call for a return to industrial policy, we argue in favor of a renewed implementation of industrial policy in Ghana. We posit that the likelihood of success is significantly higher with the benefit of better institutions.
Chapter 3 examines the subjects of firm-level productivity, productivity distribution, and resource allocation. In the first instance, we decompose labor productivity in Ghana and draw the conclusion that within-sector resource allocation primarily drives productivity growth, with structural change playing a limited role. Next, we analyze the gross allocative effect, finding evidence that resources are migrating toward sectors of lower productivity. Finally, we also examine productivity distribution through the lens of the power law distribution, establishing that firms involved in international trade exhibit higher levels of aggregation. Thus, allocating resources to such firms leads to greater productivity, thereby minimizing resource misallocation.
Chapter 4 presents a dynamic recursive computable general equilibrium for Ghana, employing a Social Account Matrix (SAM) with 2015 as the benchmark year, and we conclude this chapter with a brief analysis of SAM. Chapter 5 examines several possible simulation scenarios. We build our simulations around two industrial policy strategies: labor-intensive and capital-intensive, furthermore our simulation is informed by Ghana’s industrial policy plan. We analyze various policies such as efficiency improvement, trade protection, free trade, and taxation policy.
We conclude that capital-intensive industrialization would work better under a free trade policy. Moreover, we discovered that the cost of protecting labor-intensive industries is less than the cost of safeguarding capital-intensive industries. We conclude the dissertation with a discussion of the implications of our findings. we aim to provide a comprehensive discussion of the implications of our findings, as well as acknowledge the limitations of our study and propose potential avenues for further research. By doing so, we hope to contribute to the existing body of knowledge in our field and inspire future researchers to expand upon our work.
Creators :
Borges Jorge Tavares
Dissertation Number : 東アジア博甲第167号
Degree Names : 博士(学術)
Date Granted : 2023-09-26
Degree Grantors :
Yamaguchi University
Creators :
孫 森
Dissertation Number : 東アジア博甲第166号
Degree Names : 博士(学術)
Date Granted : 2023-09-26
Degree Grantors :
Yamaguchi University
Chromatography is considered as a key operation in the downstream process (DSP) of biopharmaceuticals, including proteins. Therapeutic proteins such as monoclonal antibodies (mAbs) with high economic values in the global market require immediate innovation in the purification step to adapt to the increased throughput from upstream.
Authorities have also initiated changes toward a more modernized pharmaceutical manufacturing platform which is agile and flexible without extensive oversight. Instead of the conventional batch operation and empirical models, the design and application of in silico modeling and simulation for integrated multi-column processes to improve their performance in capture chromatography steps have been explored in the dissertation.
Due to the fact that mechanistic models can reveal adsorption and mass transfer behaviors better in the chromatography compared to statistical models, mechanistic frameworks were applied in the study. Ion-exchange and protein A chromatography, the main categories of therapeutic protein chromatography were examined. With an example of oligonucleotides, the mass transfer phenomenon of biomolecules in different types of ion-exchange resins was explored by mechanistic models. The results demonstrate the effectiveness of modeling approaches to understand the chromatography process of biopharmaceuticals.
By focusing on the DSP of mAbs, multi-column continuous chromatography was examined with IgG samples. The study covered the repeating batch to 4-column settings in the continuous periodic counter-current (PCC) chromatography, with development in modeling and simulation tools for process quantification and evaluation. Process performances including productivity, capacity utilization, and buffer consumption were investigated by simulations with the aim to increase productivities and lower buffer consumptions, which are the main bottleneck in the current DSP. The critical operation parameter, breakthrough percent (BT%) for column switching in PCC processes, requires the information from binding capacity, mass transfer, and non-loading operations. To obtain the optimal BT% under synchronized conditions, numerical solvers developed from mechanistic models were employed. It was found that over 20% improvement in buffer consumption and resin utilization can be observed in PCC processes while the same productivity as batch operation is maintained. Furthermore, regressive relations were developed for predictions of process performances and BT% based on the findings from PCC simulations. With high coherence in R2 over 0.95, the linear regression function can act as an accelerated method in the PCC process design.
Finally, a new strategy of linear flow-velocity gradient (LFG) in the loading step was explored as a supplement to increase process efficiency. The method controls the total column capacity and the loaded amount as functions of time. Based on the relationship between the dynamic binding capacity and residence time, the gradient time of LFG was obtained. The optimal flow velocities and time gradients were examined by scanning through the range of applicable residence times. A case study of the 4-column PCC process is presented. By integrating a linear decreasing flow gradient in the PCC loading operation, the productivity has 1.4 times enhancement along with a 13% reduction in the cost of resin per amount of processed mAbs compared to constant flows.
Undoubtedly, the next generation of DSP platform technology is directed toward continuous and integrated systems. Regarding the advantages in process performances and regulation perspectives, continuous manufacturing can advance development and manufacturing while assuring the product quality. The evolution in modeling and simulation enables faster development of in silico process prediction and evaluation. With the support from models, process design and optimization in chromatography can rise to the challenge.
Creators :
Chen Chyi Shin
Dissertation Number : 創科博甲第60号
Degree Names : 博士(学術)
Date Granted : 2021-03-16
Degree Grantors :
Yamaguchi University
Phosphorus is an indispensable nutrient to sustain the daily life of all living things on Earth. However, the over-enrichment of the aquatic ecosystem with phosphorus leads to eutrophication, which is still a global environmental problem. More stringent regulations have been put in place for the limit of phosphorus discharge to address this problem and resulted in the removal of phosphorus removal becomes exceptionally crucial. Furthermore, phosphorus deposits are a non-renewable resource and forecasted to deplete until 2170, given the current usage and global population growth. Thus, the removal of phosphorus coupled with the recovery and reuse of phosphorus offer the best strategies to meet the future phosphorus demand.
Accordingly, adsorption represents a fascinating separation technique for phosphate from water because of the possibility of phosphorus recovery. Moreover, this approach has many advantages, such as efficient, easy operating conditions, low sludge production, and the possibility of regenerating the adsorbent. Numerous attractive low-cost adsorbents have been studied for phosphate removal, one of which is layered double hydroxides (LDH). Unfortunately, a high phosphate adsorption capacity of LDH can generally be achieved by calcination, which increases the preparation cost of LDH. In this study, LDH is functionalized with amorphous zirconium (hydr)oxide to obtain enhanced adsorption capacity and eliminate the high-temperature requirement during the synthesis process.
Although different treatment techniques have been developed to eliminate phosphorus contamination, including for wastewater treatment, treated water often fails to meet quality regulations. Amorphous zirconium (hydr)oxide/MgFe layered double hydroxides composites (am-Zr/MgFe-LDH) with different molar ratios (Zr/Fe = 1.5 2) were prepared in two-stage synthesis by the combination of coprecipitation and hydrothermal methods. The synthesis of the composite could eliminate the requirement of high-temperature calcination in the LDH for phosphate adsorption. Moreover, the phosphate adsorption ability of the composite was higher than that of the individual LDH and amorphous zirconium (hydr)oxide. The presence of amorphous zirconium (hydr)oxide increased the phosphate adsorption ability of composite at low pH. The adsorption capacity was increased by decreasing the pH and increasing the temperature (from 290 to 324 K). The bicarbonate (HCO3 ) was the most competitive anion for phosphate adsorption. The pseudo-secondorder model provided the best description of the kinetic adsorption data. Furthermore, the adsorbed phosphate was easily desorbed by 1 N and reused 2 N of NaOH solutions. The results suggest that the am-Zr/MgFe-LDH composite is a promising material for phosphate removal and recovery from wastewater.
A Fixed-bed column has been considered an industrially feasible technique for phosphate removal from water. Besides the adsorption capacity, the effectiveness of an adsorbent is also determined by its reusability efficiency. In this study, phosphate removal by a synthesized am-Zr/MgFe-LDH in a fixed-bed column system was examined. The results showed that the increased bed height and phosphate concentration, and reduced flow rate, pH, and adsorbent particle size were found to increase the column adsorption capacity. The optimum adsorption capacity of 25.15 mg-P g^{-1} was obtained at pH 4. The coexistence of seawater ions had a positive effect on the phosphate adsorption capacity of the composite. Nearly complete phosphate desorption, with a desorption efficiency of 91.7%, could be effectively achieved by 0.1 N NaOH for an hour. Moreover, the initial adsorption capacity was maintained at approximately 83% even after eight adsorption-desorption cycles, indicating that the composite is economically feasible. The am-Zr/MgFe-LDH, with its high adsorption capacity and superior reusability, has the potential to be utilized as an adsorbent for phosphorus removal in practical wastewater treatment.
The possible adsorption mechanisms of phosphate by am-Zr/MgFe-LDH were investigated via X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and pH at the point of zero charge (pHPZC) analyses. It was suggested that the high phosphate adsorption capacity of the composite involves three main adsorption mechanisms, which are the electrostatic attraction, inner-sphere complexation, and anion exchange, where the amorphous zirconium (hydr)oxide on the surface of the layered double hydroxides likely increased the number of active binding sites and surface area for adsorption. This study provides insights into the design of am-Zr/MgFe- LDH for phosphorus removal and recovery in a practical system.
Creators :
ATIN NURYADIN
Dissertation Number : 創科博甲第69号
Degree Names : 博士(学術)
Date Granted : 2021-09-27
Degree Grantors :
Yamaguchi University
本研究では、小児期(幼児期、学童期、青年期)の生活習慣、遺伝要因と肥満との関連を調査し、肥満予防のための公衆衛生的アプローチを検討した。食物繊維摂取が学童期の子どもの肥満および血圧、血中脂質パラメーターに及ぼす影響を明らかにすること(調査1:10~11歳の横断研究)、FT0遺伝子多型が幼児期から青年期の体格変化に及ぼす影響を明らかにすること(調査2:3歳、10歳、13歳に渡る縦断研究)、さらに、学童期から青年期にかけて身体活動がFT0遺伝子多型と体格変化に及ぼす影響を明らかにすること(調査3:13歳、18歳に渡る縦断研究)、を本研究の目的とした。
調査1では、学童期の食物繊維摂取は肥満およびコレステロール高値のリスク低減に有効であることが示唆された。
調査2では、幼児期から学童期にかけてFT0遺伝子の影響が強く表れ、中学生の年代になるとこの影響は逆に減弱し、部活動等が始まるこの時期の身体活動の影響が関連している可能性があることが推測された。
調査3では、青年期で、身体活動量が多いほどBMIの増加を弱め、FT0遺伝子多型の影響を減弱させた。
本論文の構成は5章からなる。
第1章では、緒言として、研究の背景と本研究の目的を述べる。
第2章では、食物繊維摂取が学童期の子どもの肥満および血圧、血中脂質パラメーターに及ぼす影響を検討した。
第3章では、FT0遺伝子多型が幼児期から青年期の体格変化に及ぼす影響を検討した。
第4章では、身体活動がFT0遺伝子多型と体格変化に及ぼす影響について検討した。
第5章では、結言として、本研究のまとめと今後の研究の方向性、今後の展望を述べた。
Creators :
木村 圭子
Dissertation Number : 創科博乙第7号
Degree Names : 博士(学術)
Date Granted : 2022-03-02
Degree Grantors :
Yamaguchi University
Creators :
程 攄懐
Dissertation Number : 東アジア博甲第157号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
周 暁飛
Dissertation Number : 東アジア博甲第156号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
鹿 安冉
Dissertation Number : 東アジア博甲第155号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
甘 泉
Dissertation Number : 東アジア博甲第154号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
盧 昱安
Dissertation Number : 東アジア博甲第153号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
Rapih Subroto
Dissertation Number : 東アジア博甲第152号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
Sai Ryansu
Dissertation Number : 創科博甲第93号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Nutrient pollution is one of our most pervasive, expensive, and challenging environmental problems, according to the United States Environmental Protection Agency (EPA). Phosphorus is one of the nutrients that are essential for the growth of living organisms. However, excessive amounts of nutrients released into the environment by human activities can harm ecosystems and impact human health. In surface waters, phosphorus can contribute to an overgrowth of algae called algal "blooms" that can sicken or kill wildlife and endanger aquatic habitats. Algal blooms consume dissolved oxygen in the water, leaving little or no oxygen for fish and other aquatic organisms. Algal blooms can harm aquatic plants by blocking the sunlight they need to grow. Some algae produce toxins and encourage the growth of bacteria that can make people sick who are swimming or drinking water or eating contaminated fish or shellfish. Phosphorus is often a major limiting nutrient freshwater system. Consequently, many of the wastewater treatment plant discharged into freshwater systems such as lakes, ponds, and rivers have phosphorus discharge limits. In an attempt to prevent harmful environmental effects of excess phosphorus, several techniques have been designed to remove phosphorus from wastewater. These techniques range from adsorption and precipitation to enhanced biological phosphorus removal and constructed wetlands.
Biological phosphorus removal (BPR) was first used at a few water resource recovery facilities in the late 1960s. A common element in EBPR implementation is the presence of an anaerobic tank (no nitrate and oxygen) before the aeration tank. In the next aerobic phase, these bacteria can accumulate large amounts of polyphosphate in their cells and phosphorus removal is said to be increased. The group of microorganisms that are largely responsible for P removal are known as the phosphorus accumulating organisms (PAOs).
One of the options to remove phosphorus is to utilize bacteria from nature, besides being easy to obtain and inexpensive. The application of bacteria from sediment and seawater was able to reduce phosphorus in wastewater. In this study, for screening salt-tolerant phosphorus accumulating organisms (PAOs) and investigating the P release and uptake of the organisms in saline wastewater. The samples used were sediment and seawater from Yamaguchi Bay, Yamaguchi, Japan. Sediment and seawater added 150 mL of artificial saline wastewater with media (anaerobic media). The samples were then cultured and given feed media every three hours day at 25 °C and shaken at 140 rpm. The hydraulic retention time of the cultivation was 16 h and 8 h under anaerobic and aerobic conditions, respectively. 10 sponges made of polyurethane with dimensions of 2 cm were put in Erlenmeyer flasks and was used as a bio-carrier surface for microorganisms to adhere to. Water was passed over the sponge surface to acclimatize the microorganisms growing outside the sponge as well as within its pores, ensuring sufficient growth surface. The cultivation duration was 112 days. Batch experiments were conducted over 98 days in solutions with a salinity of 3.5% and P concentrations of 1, 5, 10, and 20 mg-P/L. The P-uptake ability of microorganisms increased by increasing P concentration from 1 to 20 mg-P/L. A high P removal percentage with an average of 85% was obtained at 10 mg-P/L after day 56. The uptake and release of P were observed in saline wastewater, signifying that salt-tolerant PAOs could grow in the saline solution. Bacterial screening by isolation and sequence analysis using 16S rRNA demonstrated that two cultivated strains, TR1 and MA3, had high similarity with Bacillus sp. and Thioclava sp. EIOx9, respectively. The colony morphology analysis showed that the colonies of TR1 were rod-shaped, milky-colored, round, shiny-viscous, smooth with a defined margin, while colonies of MA3 were cream-colored with smooth surfaces and raised aspect. The TR1 was gram-stain-positive with approximately 6-10 μm long and 1.2 μm wide cells, and MA3 was gram-stain-negative with about 0.9 μm long and 0.5 μm wide cells. The results demonstrated the involvement of Bacillus sp., and Thioclava sp. in the release and uptake of P, owing to their ability to grow in saline wastewater.
Furthermore, Bacillus sp. (TR1) and Thioclava sp. (MA3) were assessed for their abiotic adaptability and phosphorus removal efficiency in saline wastewater. The effects of abiotic factors such as carbon source, pH, temperature, and salinity on bacterial growth were examined through a series of batch experiments. Both bacteria used carbon sources such as glucose, sucrose, and CH3COONa for their growth. The pH study indicated that Bacillus sp. (TR1) preferred the pH range of 6 8 and Thioclava sp. (MA3) preferred the pH range of 6-9. Bacillus sp. favorably multiplied in the temperature range of 25- 40 °C, while 25 35 °C was preferred by Thioclava sp. Salinity range of 0% 10% was favorable for TR1, with optimum growth observed at 3.5% 5%, and Thioclava sp. (MA3) preferred the salinity range of 1% 10% with optimal growth at 4%, but was absent in non-saline water. Bacillus sp. and bacterial combination (TR1 and MA3) showed similar values for phosphorus removal efficiency (100%) at 1.0 mg-P/L total P compared to Thioclava sp. (38.2%). The initial phosphorus concentration of 2.5 mg-P / L showed a slightly higher 72.35% P removal efficiency compared to the individual strains. However, phosphorus removal did not increase, but showed a downward trend with increasing at initial phosphorus. The combination possibly built a synergistic activity between the individual strains to remove phosphorus. The results demonstrated that when used individually, Bacillus sp. showed a reasonably high phosphorus removal ability than Thioclava sp., and exhibited good synergy when used in combination to remove phosphorus from saline wastewater.
Creators :
Hasanah Rafitah
Dissertation Number : 創科博甲第90号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
Creators :
前田 典昭
Dissertation Number : 創科博甲第81号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
近年,情報通信技術の進化は著しく,データ主導型社会への転換が進むなか,公共データの活用促進,すなわち「オープンデータ」の動きが世界的に広がっている.わが国でも2012年には「電子行政オープンデータ戦略」が政府決定され,オープンデータが本格的にスタートした.オープンデータは,単なる情報公開にとどまるものではなく,公共データを二次利用可能な形(機械判読に適したデータ形式,無償,再配布可能等)で民間に開放することにより,データがこれまで以上の価値を生み出すことを狙うものである.
災害対策,土木・建築事業,ヘルスケア分野など,様々な分野でオープンデータの活用が始まっており,実際に公共の利益に資する例やビジネスの収益をもたらす例などを,確認することができる.しかし,オープンデータに取り組んでいる地方公共団体は未だ100%には至っていない.また,行政が掲げているオープンデータに取り組む意義・目的のすべてが達成されているとは言い難い状況にある.
そこで本論文では,研究の対象主体を地方公共団体に定め,わが国のオープンデータを取り巻く生態系(エコシステム)について仮説を立て,実証実験を行い,地方公共団体のオープンデータ推進を阻む問題点と解決方法を明らかにすることを主たる研究目的とする.そのうえで,オープンデータの付加価値向上の検討を次の目的とする.具体的には,公開されている公共データを情報・ナレッジにまで加工し公表することで,地域社会の課題解決に貢献できるか検討することを目指す.
これらの目的を遂行するために,本論文は次の3つのテーマに取り組む.(1)全国の地方公共団体のオープンデータ取り組みの実態を明らかにし,そこに潜む課題を明確にする.(2)わが国のオープンデータの生態系に登場する,データ提供者,サービス利用者,インフラ提供者などのアクター間の関係を包括的に考察し,地方公共団体がオープンデータを推進するための新たなモデルを提案する.(3)地域活性化にかかわる政策の,提言・評価に直接役立つように「データを情報に変換する」という試みを通じて,オープンデータ活用の更なる可能性を論じる.
本論文の主要な成果は以下の通りである.地方公共団体のオープンデータ推進の実態解明では,市区町村レベルで当該取り組みを促進するには自治体間の連携が重要であることを明らかにし,自治体間連携には3つのタイプがあることを示した.次に,総務省が実施したアンケート調査を自治体の人口規模別に分析することにより,市町村レベルで推進が進まない要因を明らかにした.また,既存のホームページによるデータ公開と,新たなオープンデータによるデータ公開が混在する現状を整理し,そこに潜む課題を明確にした.以上の結果を踏まえたうえで,オープンデータ・エコシステムという枠組みで現状をモデル化し,新たに”データ仲介者”という活動主体での取り組み方法を提案した.そして,都道府県が公開している社会指標を研究対象に選択し,山口県庁にて実験を行い,提案するモデルの効果を実証した.最後に,公共データの一歩進んだ活用法として産業連関表を用いた経済波及効果推計法を提案し,IT産業の立地が少ない地方公共団体では経済波及効果の相当規模が域外に漏出してしまうことを明らかにした.これにより,データの持つ価値を高めて,政策評価にも応用できることを示した.
本論文は,以下の8章から成る.
第1章では,序論として研究の背景,目的および構成について記載する.
第2章では,自治体の情報化推進の歴史を概観したうえで,オープンデータについて定義や意義などを整理し,地方公共団体が直面する課題について論じる.
第3章では,上述の3つのテーマ(1)~(3)に対する先行研究について述べ,本論文が目指す点を明示する.
続く第4章から第7章が,本論文の主な研究成果になる.テーマ(1)は第4,5章に,テーマ(2)は第6章に,テーマ(3)は第7章に相当する.
第4章では,都道府県別にその管内の全市区町村のなかでオープンデータをインターネットで提供している市区町村の割合を算出し,訂正調査と組み合わせて分析した結果について述べる.市区町村のオープンデータの促進には,自治体間の連携が重要であることを明らかにし,自治体間の連携に3つのタイプがあることを示した.そのなかで,”都道府県がポータルサイトの公開機能を市区町村に提供し,その機能を利用して管内自治体が自らオープンデータをアップロードするタイプ”が最も有望であることを示した.
第5章では,より深く地方公共団体のオープンデータ推進の現状を解明する.先進自治体にインタビュー調査を実施したうえで,総務省が実施したアンケート調査結果を再分析し,自治体の人口規模の際により,オープンデータの公開状況に生じる違いについて定量的に検証した.その結果,①地方公共団体のオープンデータ推進には当該団体の人口規模が大きく関係していること,②現状では従来からのホームページサイトと,新たなオープンデータサイトが混在していて,「データの重複に伴う問題」が存在すること,の2点を明らかにした.
第6章では,オープンデータ・エコシステムの枠組みを用いて,わが国のオープンデータを取り巻く世界を描出し,新たに”データ仲介者”という活動主体を取り入れたモデルを提案した.従来,行政には専ら”データ提供者”の立場が求められてきたが,”データ仲介者”の立場を主体的に採ることで,少ないリソースでも付加価値を高めたデータを公開できることを示した.このことを山口県庁での社会指標を対象にした実験で検証した.
第7章では,情報・知識への返還を通じて公開データの価値を高め,政策の提言や評価に繋げることが可能であるかの検証を行った.具体的には,産業連関表を用いた「簡便差分法」という手法を提案し,ソフトウェア系IT企業が都市部に偏在する特徴が,地方公共団体のデジタル化投資の経済効果にどのような影響を及ぼすかを分析した.その結果,IT産業の立地が少ない地方公共団体では,経済波及効果の相当規模が域外に漏出してしまうことを明らかにした.この情報は政策評価に繋がる可能性を持つ.
最後に,第8章で,本論文の総括として,各章の成果をまとめ,今後の課題を論じた.
Creators :
中村 英人
Dissertation Number : 創科博甲第82号
Degree Names : 博士(学術)
Date Granted : 2022-03-16
Degree Grantors :
Yamaguchi University
The role of optimization can be found in almost all aspects of human life. Optimization is common in but not limited to the fields of engineering, economics, design, and planning. Although the optimization problems to be solved change, the optimization goal never changes. That is to find effective solutions efficiently. In modern optimization studies, the metaheuristic algorithm has been one of the most interesting methods, considering the demands of a reasonable computational time.
Many metaheuristic algorithms have been introduced. However, based on the number of tentative solutions used in the search process, metaheuristic algorithms can be categorized into (1) population-based or (2) single-trajectory-based algorithms. The searching with singletrajectory-based metaheuristic algorithms manipulates and modifies a single solution point in every iteration. In contrast, the population-based metaheuristic algorithms combine a set of solution points to create new solutions in every iteration.
A metaheuristic algorithm usually consists of two components, i.e., exploration and exploitation. Exploration means searching for solutions in the global space. In contrast, exploitation means searching for a solution by focusing on a small area or an area near an already known solution. The single-trajectory-based metaheuristic algorithm is exploitation-oriented. On the other side, the population-based metaheuristic algorithm is exploration-oriented because of searching by many points distributed on all search spaces. Balance settings between exploration and exploitation are needed to produce good solutions. In fact, most population-based algorithms will encounter decreasing in exploration and become too exploitation-oriented as the iteration increase. Any metaheuristic algorithm applies parameters to control the behavior. However, the parameters usually do not provide a good intuition of the rate of exploration and exploitation. Hence, reaching a balance between them is hard to predict just by the algorithm parameters.
This dissertation proposes a conceptual design combining the spy algorithm and B-VNS. The spy algorithm is a population-based metaheuristic algorithm that mimics the strategy of a group of spies, the spy ring. The spy algorithm is a new concept with the main idea to ensure the benefit of exploration and exploitation, and cooperative and non-cooperative searches always exist. This goal is implemented by utilizing three kinds of dedicated search operators and regulating them in a fixed portion. The occurrences of exploration and exploitation are controlled by algorithm parameters. Thus, the spy algorithm parameters provide good before-running intuition to easier reach the balance between exploration and exploitation. The spy algorithm is first designed to be used in the continuous optimization model.
The spy algorithm was compared to the genetic algorithm, improved harmony search, and particle swarm optimization on a set of non-convex functions by aiming at accuracy, the ability to detect many global optimum points, and computation time. The Kruskal-Wallis tests, followed by Games—Howell post hoc comparison tests, were conducted using a. for the comparison. The statistical analysis results show that the spy algorithm outperformed the other algorithms by providing the best accuracy and detecting more global optimum points within less computation time. Furthermore, those results indicate that the spy algorithm is more robust and faster than other algorithms tested.
On the other hand, the B-VNS algorithm is a modification of the variable neighborhood search (VNS) algorithm. The benefit of VNS comes from its thorough search while avoiding the local optimum trap by moving to the neighboring point called shaking. The local search after shaking is another benefit of VNS that makes VNS a prominent algorithm. However, the thorough search has the drawback of long computation time. This dissertation introduces a modified neighborhood structure to reduce the computation times. The main idea is to apply the binomial distribution to create the neighboring point. As a result, the neighborhood distance has a random pattern. However, it follows a binomial distribution instead of a strictly monotonic increase like in VNS. The B-VNS is a modification of VNS and is classified as a single solution-based algorithm. The B-VNS is intended to solve combinatorial optimization problems, particularly the quadratic unconstrained binary optimization (QUBO) problems categorized as NP-hard problems.
The B-VNS and VNS algorithms were tested on standard QUBO problems from Glover and Beasley, on standard max-cut problems from Helmberg-Rendl, and those proposed by Burer, Monteiro, and Zhang. Finally, Mann-Whitney tests were conducted using a. to compare the performance of the two algorithms statistically. It was shown that the B-VNS and VNS algorithms are able to provide good solutions, but the B-VNS algorithm runs substantially faster. Furthermore, the B-VNS algorithm performed better in all of the max-cut problems regardless of problem size and in QUBO problems with sizes less than
The spy algorithms and B-VNS have different designs in the process and the domain of the solved problems. However, considering the benefit of the spy algorithm and B-VNS, their combination has the potential to provide good results. Conceptually, the spy algorithm can be seen as the first step of B-VNS. Conversely, B-VNS can be considered an additional refinement for the spy algorithm.
Creators :
Pambudi Dhidhi
Dissertation Number : 創科博甲第102号
Degree Names : 博士(学術)
Date Granted : 2022-10-12
Degree Grantors :
Yamaguchi University
Political connections are considered a valuable resource in not only high-corruption countries but also low-corruption countries. This dissertation investigates the relationship between political connections and Sharia compliance, aiming to deepen understanding of the nature of political connections, as Sharia compliance prohibits engaging in corruption. Specifically, I analyze whether: 1) political connections and Sharia compliance affect merger and acquisition (M&A) performance; 2) connections to politicians affect the market response to firms' inclusion in or exclusion from the Indonesia Sharia Stock Index (ISSI); 3) political connections and Sharia compliance have been valuable during the COVID-19 pandemic; and 4) political connections affect firms' environmental performance.
This dissertation comprises six chapters. Chapters 1 and 6 respectively introduce and conclude this dissertation. The remaining four chapters (i.e., Chapters 2-5) are essays on the empirical relationship between political connections and Sharia compliance. In Chapter 2, I study the impact of political connections and Sharia compliance on M&A performance, focusing on M&A deals in Indonesia during 2010-2016. I find that while political connections can improve market reactions to M&A announcements, Sharia compliance has a positive but insignificant impact on M&A performance. I further find that there is a substitution relationship between Sharia compliance and political connections: Sharia -compliant firms with political connections have poorer M&A performance than non-Sharia-compliant firms with political connections.
Chapter 3 examines market responses to firms' addition to and removal from the ISSI and how political connections influence those market responses. I employ two kinds of analysis. First, using the event-study methodology, I measure abnormal returns surrounding the announcement of each firm's addition to or removal from the ISSI. Second, to more precisely identify the relationship between political connections and Sharia compliance, I use a pooled regression analysis. The results show that neither addition to nor removal from the ISSI produces abnormal returns for Indonesian firms, indicating that investors are little concerned with ISSI reconstitutions. Furthermore, political connections increase firms' value before inclusion in the ISSI, but the benefits of these connections are lost after their addition to the index.
Chapter 4 offers novel evidence by investigating the value of political connections and Sharia compliance during the COVID-19 pandemic. I use the event-study methodology to measure the stock market reaction to the COVID-19 pandemic, and conduct a pooled regression analysis to more precisely identify the value of political connections and Sharia compliance during the pandemic. I find that a stock market anomaly occurred during the COVID-19 pandemic in Indonesia, in that the pandemic had a positive impact on the stock market. I also find that there was value for firms in being Sharia-compliant during the pandemic when the government announced tax incentives for firms.
In Chapter 5, I investigate the relationship between political connections and the environmental performance of Sharia -compliant firms. I use a unique sample of firms covered by Indonesia's Program for Pollution Control Evaluation and Rating during 2013-2019. I find that political connections are less (more) valuable for Sharia-compliant firms (non-Sharia-compliant firms) m enhancing their environmental performance.
Creators :
Wahyono Budi
Dissertation Number : 東アジア博甲第158号
Degree Names : 博士(学術)
Date Granted : 2022-09-27
Degree Grantors :
Yamaguchi University
Creators :
常 艶麗
Dissertation Number : 東アジア博甲第159号
Degree Names : 博士(学術)
Date Granted : 2022-09-27
Degree Grantors :
Yamaguchi University
Population growth drives the demand for energy, which is the most pressing human need today. It puts pressure on other related sectors and increases wastewater production, which is a big problem in some countries that is inaccessible to available wastewater treatment facilities. Concerning the SDGs 2030 target, which mentions integrated sectors to deal with environmental issues, energy and water as a part of the water-energy-food nexus have a high linkage to build substantial economic and ecological benefits. Therefore, they have become the core attention of the world at this moment.
To deal with the problem solving mentioned above, nowadays, an alternative energy converter integrated wastewater treatment has been massively developed to achieve green label production of products. Many countries, favoured by their scientists and practitioners, compete to find technology that is a user-friendly, eco-friendly, back-to-nature concept, inexpensive and can be accepted in any society stratifications. However, there is an available standalone converter technology known as conventional technology, which is a disintegrated system with no added value. This challenge opens an opportunity to develop a fully integrated system with any advantages. One of the promising technologies needed for solving the environmental problem and simultaneously producing other benefits for human living is a part of the bioelectrochemistry system (BES), which is microbial fuel cell (MFC). It could be easily assisted with the available conventional wastewater treatment, and it gives more benefits not only in energy production but also for remediating the environment through the superior biocatalyst, named electroactive bacteria (EAB), which has the availability to reduce organic and inorganic matter and generating electricity. However, factors affecting MFC have been a drawback in their field application that must be concerned extensively. Therefore, this study accommodates to investigation more in order to get an optimum condition in operation so that the technology could be widely used properly on the full scale.
The disadvantages of the air–cathode single-chamber microbial fuel cell (AC-SCMFC) performance can be caused by numerous factors, and retention time (RT) is one such factor. It is difficult to conclude the ideal RT run for the specific tests under the same conditions. To determine the optimum RT for various types of microbial fuel cell (MFC), an AC-SCMFC batch-mode reactor was carried out by comparing different types and concentrations of substrates based on the main parameters of organic removal and power generation. The AC-SCMFC reactor was designed for the effective working volume of 500 mL and operated for 52 d in batch mode with factors being significantly correlated with the performance of the MFC reactor, which were two different substrates, sucrose and acetate, and three different chemical oxygen demand (COD) levels of 400; 1000, and 2500 mg/L (low, medium, and high, respectively) equipped with two graphene nanoplatelets (GNPs)-based electrodes connected to 100 Ω resistance and plugged onto a ii data logger. The results of this study indicated a significant pattern at the medium level, at which the optimum RT of sucrose was achieved at 24 h and that of acetate at 48 h. In comparison, the performances pattern at low and high levels of both substrates was insignificant to determine the optimum RT. For further application, the recommended RT for both substrates at any concentration is 24 h due to high overall performance, and the optimum RT established in this study could be applied to all types of MFC research, particularly in oxidizable or biodegradable organic ranges, which ensures high performance.
One of the important factors in enhancing the performance of microbial fuel cells (MFCs) is reactor design and configuration. Therefore, this study was conducted to evaluate the regressors and their operating parameters affecting the double anode chamber–designed dual-chamber microbial fuel cell (DAC-DCMFC) performance. Its primary design consists of two anode chamber compartments equipped with a separator and cathode chamber. The DAC-DCMFCs were parallelly operated over 8 days (60 days after the acclimation period). They were intermittently pump-fed with the different organic loading rates (OLRs), using chemically enriched sucrose as artificial wastewater. The applied OLRs were adjusted at low, medium, and high ranges from 0.4 kg.m-3.d-1 to 2.5 kg.m-3.d-1. The reactor types were type 1 and type 2 with different cathode materials. The pH, temperature, oxidation-reduction potential (ORP), optical density 600 (OD600), chemical oxygen demand (COD), and total organic carbon (TOC) were measured, using standard analytical instruments. In general, the power production achieved a maximum of 866 ± 44 mW/m2, with a volumetric power density of 5.15 ± 0.26 W/m3 and coulombic efficiency of 84%. Two-stage COD and TOC removal at medium OLR achieved a range of 60–80%. Medium OLR is the recommended level to enhance power production and organic removal in DAC-DCMFC. The separated anode chambers into two parts in a dual anode chamber microbial fuel cell adjusted by various organic loadings expressed a preferable comprehension of the integrated MFCs for wastewater treatment.
With respect to both studies, RT influences the design and configuration of MFCs, particularly in this regard, modified anode compartment of DCMFCs adapted to the range of oxidizable or biodegradable organics and reactor components towards control and dependent variables provide the simultaneous performance of DCMFCs in organic removal and power generation. In addition, DAC-DCMFC offers an opportunity to achieve optimal conditions in concurrent MFC-assisted wastewater treatment. Therefore, this study is one step closer to understanding the operating conditions comprehensively, which are the dominant factors affecting performance.
Creators :
Ganjar Samudro
Dissertation Number : 創科博甲第115号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
Creators :
山田 耕輝
Dissertation Number : 創科博甲第118号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
Creators :
小村 有紀
Dissertation Number : 東アジア博甲第160号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
Creators :
張 学盼
Dissertation Number : 東アジア博甲第161号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
Creators :
松尾 朗
Dissertation Number : 東アジア博甲第162号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
This dissertation focuses on the experiences of a group of Japanese university students who participated in a short-term study abroad program in the Philippines. While the main objective of the four-week sojourn was to improve the participants’ English language skills, I explored the effects of the trip holistically as a qualitative case study to examine the unique learning context of studying English in the Philippines, a relatively new phenomenon that has developed from the turn of the 21st century. The primary form of data I used was interview responses obtained from 14 focal participants among a larger cohort of 103 students who traveled together in the summer of 2018. The target students were mostly low to intermediate level (CEFR A2 to B1) before departure and returned at a marginally higher benchmark (CEFR B1 average) according to standardized testing scores. More importantly, most students did not have extensive international experience prior to the sojourn, and overall they expressed a more open stance to using English for communication after the trip. In this case and context, positive affective development occurred due to intensive one-on-one instruction with Filipino teachers who interacted with the Japanese students in a warm, friendly, and supportive manner. This learning situation is characteristically different from North American and other Western contexts typically associated with English learning, and with its relative ease of access geographically and financially, offers a practical alternative to Japanese students unable to study abroad otherwise. The results of this study indicate how Japanese learners of English adopt subtle changes in outlook through short-term study abroad programs in diversifying contexts.
This research contributes significantly to the field of language learning in study abroad by documenting the perspectives of learners from Japan traveling within Asia. Study abroad itself is a relatively new area of inquiry which has focused predominantly on Western learners and contexts. Existing research on Japanese learners tends to concern privileged, advanced-level learners whose experiences may seem removed from the ordinary lives of students attending university in rural areas or those who do not consider themselves academically or socioeconomically exceptional. Furthermore, the amount of existing research on short-term study abroad is severely limited and does not thoroughly account for the experiences of Japanese learners of English in the Philippines, a study abroad destination which has gained substantial popularity but remains underrepresented. Accounting for the social, cultural, and ideological circumstances of learning in a non-native English speaking context in Asia allows for a more nuanced interpretation of how monolingual Japanese speakers first encounter English as an international language.
I collected data in multiple forms to document the complexity of the case. As the participants’ English teacher and chaperone to the Philippines, I was immersed in the learning contexts in the students’ home country as well as abroad. Semi-structured interviews before and after the study abroad experience were conducted in the informants’ native language. Written questionnaires were administered to the larger cohort of students who traveled together to obtain a more general assessment of students’ impressions regarding the study abroad experience. Standardized test scores were accessed for reference. These multiple data sources were drawn on to illustrate the changes observed in the perspectives of the focal informants.
While the learning experiences of each informant were unique, I identified common themes among the ways students collectively changed their attitudes and beliefs toward English and language learning through their participation in the short-term study abroad program. First, the learners in this study increased their self-confidence and motivation to learn English and overcame their fear, anxiety, and inhibition toward using English to varying degrees. Second, they expanded their interests in learning about other languages and cultures while becoming more aware of the boundaries of their own culture. Third, their perceived communicative ability in English improved, which they found was not the same as having to perform well on standardized English tests. Fourth, participants’ sense of success in improving their English language proficiency was less certain, reflecting their divergent test score gains on standardized exams. These reported changes in perspective were not lifechanging transformations of learners’ social identities, but their previously constructed views of language, culture, communication, and learning were evidently affected.
The qualitative effects of study abroad experienced by the informants of this study cannot be assessed adequately with the language proficiency tests highly regarded in mainstream Japanese society. Language ideologies prevalent in the participants’ home and host contexts for learning need to be considered in order to explain why the changes occurred. The learners in this study initially had an additional affective barrier toward communication in intercultural contexts because they could not take advantage of the widespread use of English as a lingua franca without first making efforts to use English itself. Since they were used to monolingual discourses in Japan, the idea of using English as a lingua franca, not only as a “perfect” native language, had to be presented to them in a reallife situation. The study abroad experience nudged learners toward using English in ways that reflect the Global Englishes paradigm. These slight shifts in mindset are indicative of attitudinal changes gradually taking place within Japan and are not restricted to individuals who identify with international communities.
Creators :
池田 理紗
Dissertation Number : 東アジア博甲第163号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
Creators :
植田 隆博
Dissertation Number : 東アジア博甲第164号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
本論文は,申請者が山口大学大学院東アジア研究科在学中において進めてきた,遠隔教育支援環境における授業と学習活動の支援に関する研究をまとめたものである.
人口減少社会の到来により,特に地方において,適正規模での学校運営が難しい小規模の学校が増加傾向にある.小規模校では,きめ細やかな指導等が行える一方で,人間関係が固定化しがちであったり,多様な意見や考え方に触れることが少なくなったりなど,教育上の課題を抱えている.その解決策の1つとして,複数校の児童生徒が1つの学校に集まって合同授業が実施されているが,時間的・金銭的な問題などから実施回数が制限されるケースが多い.この合同授業を補う形で,日進月歩の勢いで進歩しているICT技術を活用した遠隔合同授業の取組みが期待され,教育実践が進められてきている.
一方,小学校や中学校だけでなく,大学などの高等教育機関においてもICTを活用した遠隔教育は進められてきている.さらに,新型コロナウィルス感染症のパンデミックを契機に,小学校・中学校・高校や高等教育機関だけでなく,塾など様々な場でオンライン授業あるいはオンライン学習といった遠隔教育の取り組みも行われてきている.
しかしながら,オンライン授業や遠隔合同授業を実践する上では,環境整備面や授業実施面などで課題が存在する.特に,授業実施時における教員の作業負荷が非常に高いことが問題であり,オンライン授業や遠隔合同授業の特性や授業プロセスを踏まえた仕組みの構築や機能の開発が必要となる.さらに,オンライン授業や遠隔合同授業における学習者個人あるいはグループによる学習活動や,教員による教授活動や学習者グループの活動支援のプロセスを分析した上で,その状況に応じた支援手法を検討し,学習支援機能やその機能と連動した授業支援機能を遠隔教育支援ツール・アプリとして提供することが必要となる.
そこで本研究では,高校・大学などにおけるオンライン授業や小学校・中学校の小規模校における遠隔合同授業といった遠隔教育を対象にして,校種やICT活用能力に応じた機能や画面に切り替えることができる設計思想を持った,課題解決的な学習が展開される際の学習者の学習活動と教員の教授活動を支援するための遠隔教育支援環境を設計して開発することを目的にする.
本論文では,本研究の目的を達成させるために,以下に示す5つの調査・研究・開発の成果がまとめられている.
(1) 遠隔教育の支援環境に関する研究動向の調査
(2) 遠隔教育を支援する環境・機能についての整理と必要機能の提案
(3) 「クラス(学級)」と「個」をつなぐ遠隔教育支援環境「つながる授業アプリ」の開発と評価
(4) 「比べる」協働的思考活動支援機能の開発と評価
(5) グループ学習活動・対話状況確認支援機能とグループ活動状況管理機能の開発と評価
(1)では,遠隔教育に関する研究動向を調査した.これらの整理・分類などを踏まえ,遠隔教育における学習環境,学習支援機能,授業支援機能の研究に対する本研究の位置づけを行った.
(2)では,遠隔教育をICTで支援する環境について説明した.さらに,2つのつながり(「クラス(学級)」と「個」)を保障する遠隔教育システムと協働学習支援システムに必要な機能を整理した.
(3)では,遠隔教育システムと協働学習支援システムの両方の機能を併せ持つ遠隔教育支援環境「つながる授業アプリ」を設計・開発した.さらに,「つながる授業アプリ」のの有用性を評価し,基本機能を完成させた.
(4)では,遠隔合同授業における小学生を対象として,より深い学びを実感できることを目的として,グループ活動時の思考に必要なプロセスを整理し,最も基本的な思考活動の1つである「比較思考」を協働的に進めることができる支援を「つながる授業アプリ」の拡張機能として実装した.「比べる」協働的思考活動支援機能は,「比べる」思考手順を1スライドずつ学習者間の協働的な思考手順として提示して,思考活動プロセスをガイドする仕組みである.さらに,開発した支援機能についてその有用性を評価した.
(5)では,大学の遠隔教育を対象にして,グループ学習活動における学習者の対話内容の確認や振り返り,教員による見とりを支援する目的として,対話音声データ(バーバル情報)とノート記述データ(ノンバーバル情報)を活用した活動状況・対話状況の可視化機能を「つながる授業アプリ」の拡張機能として実装した.さらに,教員の見とり支援としてグループ活動状況管理機能も拡張機能として実装し,これらの機能の有用性を評価した.
以上により,オンライン授業が展開でき,学習者の個別学習やグループ学習の活動支援や教員の見とり支援が可能な「つながる授業アプリ」の開発・授業実践を通して,遠隔教育において必要な学習環境の要素機能,学習支援・授業支援の機能を確認することができた.
Creators :
横山 誠
Dissertation Number : 東アジア博甲第165号
Degree Names : 博士(学術)
Date Granted : 2023-03-16
Degree Grantors :
Yamaguchi University
published_at 2012
Creators :
Fukuda Takamasa
Dissertation Number : 東アジア博乙第5号
Degree Names : 博士(学術)
Date Granted : 2012-07-25
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Syaiful Anam
Dissertation Number : 理工博甲第651号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
福田 弓恵
Dissertation Number : 理工博甲第665号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Kanthima Phummala
Dissertation Number : 理工博甲第666号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
奥 和義
Dissertation Number : 東アジア博乙第7号
Degree Names : 博士(学術)
Date Granted : 2015-01-28
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
郭 玲玲
Dissertation Number : 東アジア博甲第79号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
于 華
Dissertation Number : 東アジア博甲第80号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
郭 淑娟
Dissertation Number : 東アジア博甲第81号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
張 明涛
Dissertation Number : 東アジア博甲第82号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
舩場 大資
Dissertation Number : 東アジア博甲第83号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Ni Made Sofia Wijaya
Dissertation Number : 東アジア博甲第84号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
永野 ひとみ
Dissertation Number : 東アジア博甲第85号
Degree Names : 博士(学術)
Date Granted : 2015-03-16
Degree Grantors :
Yamaguchi University
published_at 2013-03-18
Creators :
Vuong thi Bich Lien
Dissertation Number : 東アジア博甲第68号
Degree Names : 博士(学術)
Date Granted : 2013-03-18
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Zhao Xiaoyan
Dissertation Number : 東アジア博甲第86号
Degree Names : 博士(学術)
Date Granted : 2015-09-30
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Jiao Yang
Dissertation Number : 東アジア博甲第87号
Degree Names : 博士(学術)
Date Granted : 2015-09-30
Degree Grantors :
Yamaguchi University
published_at 2015
Creators :
Chen Lin
Dissertation Number : 東アジア博甲第88号
Degree Names : 博士(学術)
Date Granted : 2015-09-30
Degree Grantors :
Yamaguchi University
published_at 2008
Creators :
Mkam Tchouobiap Serges Eric
Dissertation Number : 理工博甲第495号
Degree Names : 博士(学術)
Date Granted : 2008-09-26
Degree Grantors :
Yamaguchi University
published_at 2011
Creators :
Wang Chiu Yang
Dissertation Number : 東アジア博甲第61号
Degree Names : 博士(学術)
Date Granted : 2012-03-16
Degree Grantors :
Yamaguchi University
published_at 2011
Creators :
佐々木 武夫
Dissertation Number : 東アジア博乙第3号
Degree Names : 博士(学術)
Date Granted : 2011-10-26
Degree Grantors :
Yamaguchi University
published_at 2011
Creators :
Suzuki Yasutaka
Dissertation Number : 医博甲第1213号
Degree Names : 博士(学術)
Date Granted : 2011-03-16
Degree Grantors :
Yamaguchi University
published_at 2010
Creators :
Mubassara Sanzida
Dissertation Number : 医博甲第1157号
Degree Names : 博士(学術)
Date Granted : 2010-03-16
Degree Grantors :
Yamaguchi University
published_at 2013-03-18
Creators :
Kuo Shu Ling
Dissertation Number : 東アジア博甲第69号
Degree Names : 博士(学術)
Date Granted : 2013-03-18
Degree Grantors :
Yamaguchi University
published_at 2013
Creators :
Rana A.Y.K.Md.Masud
Dissertation Number : 医博甲第1328号
Degree Names : 博士(学術)
Date Granted : 2013-09-27
Degree Grantors :
Yamaguchi University
published_at 2013
Creators :
Teng Xueli
Dissertation Number : 東アジア博甲第72号
Degree Names : 博士(学術)
Date Granted : 2013-09-27
Degree Grantors :
Yamaguchi University
published_at 2013
Creators :
Yu Jianan
Dissertation Number : 東アジア博甲第73号
Degree Names : 博士(学術)
Date Granted : 2013-09-27
Degree Grantors :
Yamaguchi University
published_at 2013
Creators :
Qi Jian
Dissertation Number : 東アジア博甲第74号
Degree Names : 博士(学術)
Date Granted : 2013-09-27
Degree Grantors :
Yamaguchi University
published_at 2013-11-13
Creators :
庄 麗
Dissertation Number : 理工博乙第125号
Degree Names : 博士(学術)
Date Granted : 2013-11-13
Degree Grantors :
Yamaguchi University
published_at 2013
Creators :
I Gede Hendrawan
Dissertation Number : 理工博乙第126号
Degree Names : 博士(学術)
Date Granted : 2014-01-15
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
林 孝哉
Dissertation Number : 医博乙第1068号
Degree Names : 博士(学術)
Date Granted : 2014-03-04
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
波出石 誠
Dissertation Number : 理工博甲第621号
Degree Names : 博士(学術)
Date Granted : 2014-03-17
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
稲葉 和也
Dissertation Number : 理工博甲第623号
Degree Names : 博士(学術)
Date Granted : 2014-03-17
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
Zhang Xinyuan
Dissertation Number : 東アジア博甲第75号
Degree Names : 博士(学術)
Date Granted : 2014-03-17
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
瀬崎 譲廣
Dissertation Number : 東アジア博甲第76号
Degree Names : 博士(学術)
Date Granted : 2014-03-17
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
Putra Eureka
Dissertation Number : 東アジア博甲第78号
Degree Names : 博士(学術)
Date Granted : 2014-09-24
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
Hawa La Choviya
Dissertation Number : 医博甲第1376号
Degree Names : 博士(学術)
Date Granted : 2014-09-24
Degree Grantors :
Yamaguchi University
published_at 2014
Creators :
菊池 耕士
Dissertation Number : 医博甲第1377号
Degree Names : 博士(学術)
Date Granted : 2014-09-24
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
重見 秀和
Dissertation Number : 東アジア博甲第89号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Sun Nai Li
Dissertation Number : 東アジア博甲第90号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
椿 光之助
Dissertation Number : 東アジア博甲第91号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Wei Chune
Dissertation Number : 東アジア博甲第92号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Chen Chen Hao
Dissertation Number : 東アジア博甲第93号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Yuan Yu
Dissertation Number : 東アジア博甲第94号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Bao Huricha
Dissertation Number : 東アジア博甲第95号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
正長 清志
Dissertation Number : 東アジア博甲第96号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
中野 陽平
Dissertation Number : 医博甲第1454号
Degree Names : 博士(学術)
Date Granted : 2016-03-17
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Cheng Qing
Dissertation Number : 東アジア博甲第97号
Degree Names : 博士(学術)
Date Granted : 2016-09-30
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Reshalaiti Abilimu
Dissertation Number : 東アジア博甲第98号
Degree Names : 博士(学術)
Date Granted : 2016-09-30
Degree Grantors :
Yamaguchi University
published_at 2016
Creators :
Zhang Ren
Dissertation Number : 東アジア博甲第99号
Degree Names : 博士(学術)
Date Granted : 2016-09-30
Degree Grantors :
Yamaguchi University