Miyamoto Ayaho
Affiliate Master
Yamaguchi University
Development of VR-based inspection support system for crack and spalling detection in deteriorating bridges
Memoirs of the faculty of engineering, Yamaguchi university Volume 66 Issue 2
Page 21-34
published_at 2016-03
Title
ひび割れおよび剥離検出のためのVR技術を用いた橋梁目視点検支援システムの開発
Development of VR-based inspection support system for crack and spalling detection in deteriorating bridges
Abstract
In this study, a novel VR-based system for inspection of deteriorating concrete bridges is proposed to support of the crack and spalling detection which is a key role in existing bridge maintenance. The proposed system, called a VR-based support system for bridge inspection, was applied to an aged bridge for confirming the representing ability of both cracking and spalling damages as a specific example. Experimental results showed that the VR images data with hammering sounds (audio) data have a sufficient ability of representing both crack width over 0.2 mm and a certain spalling area near concrete surface. In this system, the three-dimensional image(photo) data was used to recognize the cracking damage for professional visual inspector. On the other hand, as spalling damage inside the concrete surface couldn’t be identified accurately from only image(photo) data, then the hammering sounds (audio) data was incorporated into the system as an additional function for recoginittion of the spalling damage.
Creators
Emoto Hisao
Creators
Takahashi Jun
Source Identifiers
[PISSN] 1345-5583
[NCID] AN00244228
Creator Keywords
maintenance support system
visual inspection
virtual reality(VR)
crack
spalling
damage
hammering sounds
Languages
jpn
Resource Type
departmental bulletin paper
Publishers
山口大学工学部
Date Issued
2016-03
File Version
Version of Record
Access Rights
open access
Relations
[isPartOf]
[URI]http://memoirs.lib-e.yamaguchi-u.ac.jp/