Leakage-loss characteristics of conductor-backed coplanar waveguide with air-gap-spacing (AGS) dielectric sheets
2003 Asia-Pacific Microwave Conference Proceedings, 2002, Seoul Volume 3
Page 1696-1699
published_at 2003
Title
Leakage-loss characteristics of conductor-backed coplanar waveguide with air-gap-spacing (AGS) dielectric sheets
Low leakage-loss Conductor-Backed Coplanar Waveguide with air-gap-spacing (AGS) dielectric sheets has been already proposed based on the calculation with the hybrid 2D-FDTD analysis and the curve-fitting procedure. The leakage-loss characteristics of CBCPW with AGS dielectric sheets have been calculated in detail by using the much fine Yee cells. From the numerical results, the low leakage-loss characteristics and the existence of the optimum width for the air-gap have been certainly confirmed. In this paper, we have focused on the relationship between the leakageloss and the permittivity of their additional dielectric sheets. From these analytical results, we have tried to find out what structure of CBCPW with AGS dielectric sheets is effective for the leakage-loss reduction.
Languages
eng
Resource Type
conference paper
Publishers
Institute of Electronics, Information and Communication Engineers
Date Issued
2003
Rights
Copyright c [2003] IEEE.. Reprinted from 2003 Asia-Pacific Microwave Conference Proceedings, vol. 3, 2003, 1696-1699. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Yamaguchi University Library's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.()
File Version
Version of Record
Access Rights
open access
Schools
大学院理工学研究科(工学)