Contents Menu

Study on utilization of 3D model and GIS for Sabo Dam inspection

DT15100123_Abstract.pdf
[abstract] 5.2 MB
DT15100123_FullText.pdf
[fulltext] 34.4 MB
Title
砂防施設点検に対する3次元モデルとGISの活用に関する研究
Study on utilization of 3D model and GIS for Sabo Dam inspection
Degree 博士(工学) Dissertation Number 創科博甲第123号 (2023-09-26)
Degree Grantors Yamaguchi University
[kakenhi]15501 grid.268397.1
Abstract
Since social infrastructure, which was intensively developed during the high economic growth period,will deteriorate all at once in the future, maintenance and management of facilities will be an issue in thefuture. Currently, facility inspection records are based on paperbased forms, and are not premised onautomatic processing by computer. The authors have developed the “Smart Chosa” and realized a databaseof facility inspections and a GIS System. The Smart Chosa was able to record the location of the inspectionphoto on a two dimensional map, but because it was necessary to approach the deformed part when takingthe inspection photo, it was not possible to grasp the position, direction, and size of the entire facility.Therefore, we applied 3D GIS to Smart Chosa for sabo dams, created a 3D model from photographs takenon site, and conducted research to manage inspection results on the 3D model.
This study summarizes the results of research on management of inspection photographs on a 3D GISin order to improve the efficiency of management of inspection photographs of sabo facilities. This thesisconsists of 6 chapters, and the main content of each chapter is as follow.

[Chapter 1: Introduction]
In this chapter, the current status and issues of the maintenance and management of socialinfrastructure in Japan were summarized. Utilization of 3D models for maintenance and management ofcivil engineering facilities, high-precision positioning used for alignment of 3D models, efficientinspection of concrete structures, and existing research trends on iPhone LiDAR applications wereorganized. On that basis, the purpose and points of focus of this research were organized, and the structureand outline of this paper were described.

[Chapter 2: Comparison of 3D models and examination of application to sabo facilities maintenance management system]
In this chapter, three types of models, a BIM/CIM model, a 3D point cloud model, and a 3D surfacemodel, are compared and examined as 3D models to be applied to the maintenance management system.The problem setting in this chapter is the selection of a 3D model to be used in this system. The constraintis that the Sabo dams including the existing dam can be modeled in 3D. At present, there are few BIM/CIMmodels for sabo dams, so when applying to existing sabo dams, we believe that a 3D surface model thatcan be created by SfM/MVS technology from photographs taken by UAVs will be useful. The 3D modelin the research was a 3D surface model.
Knowledge about the 3D model that can be applied to the sabo facility maintenance managementsystem and knowledge for utilizing the 3D model in the 3D GIS were obtained.

[Chapter 3: Performance evaluation of RTK receiver used for Sabo facility investigation support system]
In this chapter, a survey of high-precision positioning technology necessary for positioning 3D modelsof sabo dams and inspection photos on a 3D GIS, and evaluation of positioning performance in sabo damsand surrounding forests are conducted. The problem setting in this chapter is whether or not locationinformation can be acquired during surveys of Sabo facilities, and accuracy verification. The constraintis that real-time high-precision positioning is required using inexpensive and small devices inenvironments that are unfavorable for satellite positioning (such as sabo dams and forests).
It was confirmed that the multi-band receiver whose performance was evaluated has a horizontalvariation of 22 mm (2DRMS) even in a poor environment where about 70% of the sky directly below thesabo dam is covered. It was confirmed that the method can be applied to aligning 3D models ofphotographs.

[Chapter 4: Investigation of image synthesis for creation of sabo dams inspection image]
In this chapter, as a basic examination of 3D model creation, the image synthesis method is organized.The problem setting in this chapter is normalization and image combination necessary for synthesizinginspection photographs (2D). The constraint is that the inspection photography equipment is a smartphonefor field survey. In the feature point detection method for image synthesis, we compared two types offeature amounts, SIFT feature amount and AKAZE feature amount, and confirmed the accuracy byexperiments. In addition, RANSAC was used as an outlier removal method. By combining these methods,we performed image synthesis using multiple photographs of the concrete surface of the sabo dam.

[Chapter 5: 3D model creation by SfM/MVS and application to 3D GIS]
The problem setting in this chapter is a superimposed display of a 3D Sabo dam model and inspectionphotographs. The constraint is that the equipment that can be used to create a 3D model of inspectionphotographs is limited to equipment (compact and lightweight) that can be brought by local workers. Inthis chapter, we first present an overview of the "smart chosa" system that expands the scope of applicationfrom 2D to 3D in this research. After that, we investigated SfM/MVS processing to create a 3D surfacemodel. By creating a 3D model of the sabo dam and a 3D model of inspection photos by SfM/MVSprocessing, and importing them into a 3D GIS, we succeeded in superimposing the sabo dam andinspection photos on a 3D map.
In addition, we examined a method of creating a 3D surface model using the iPhone LiDARapplication that can perform 3D measurement using the LiDAR function installed from iPhone12Pro. Wecompared the 3D model created with the iPhone LiDAR app and the 3D model created using MetaShape,a software that implements SfM/MVS processing, and confirmed the image resolution and positionalaccuracy for use as inspection photographs. In order to incorporate the created 3D model into 3D GISsoftware, we examined a method for matching the orientation and position, and actually superimposedthe 3D model of the sabo dam and the 3D model of the inspection photograph on the 3D GIS. I haveconfirmed that it is possible.

[Chapter 6: Summary]
In this chapter, a summary of the results obtained in Chapters 2 to 5 and future issues were discussed.
The result of this research is a visualization method that makes it easy for people other than fieldinvestigators to understand the situation of the site by importing 3D surface models acquired by variousmethods into 3D GIS. 3D surface models include SfM models created from photos taken with aUAV/smartphone, SfM models created from photos taken with a handheld RTK rover, and 3D modelscreated with the iPhone LiDAR app.
By using this method, it is possible to grasp the deformation position and deformation direction of thesabo dam in 3D space, and by superimposing the photographs of each inspection, it is possible to graspthe change over time.
Creators 山野 亨
Languages jpn
Resource Type doctoral thesis
File Version Version of Record
Access Rights open access