Contents Menu

Study on Effect of Cutting Fluid (1st report) : Orthogonal Cutting on Various Materials by High Speed Steel Tool

Memoirs of the Faculty of Engineering, Yamaguchi University Volume 20 Issue 1 Page 133-141
published_at 1969
KJ00002361188.pdf
[fulltext] 597 KB
Title
油剤の効果に関する研究(第1報) : 高速度鋼工具による各種被削材の二次元切削
Study on Effect of Cutting Fluid (1st report) : Orthogonal Cutting on Various Materials by High Speed Steel Tool
Creators Okusa Kitao
Creators Yamamoto Eiji
Creators Masudomi Masayuki
Source Identifiers
This is a report on the effects of cutting fluids, when various metallic materials are cut under orthogonal cutting at constant cutting speed. The effects of cutting fluids on cutting force, shear angle, etc. are investigated in the experiments. The kinds of cutting fluids used are water, water base and mineral oil base. The materials used in this experiment are carbon steel S10C, S15C, alloy steel SCM4,18-8 stainless steel (SUS27), cast iron (FC20) and 4-6 brass. The results obtained are as follows. 1. In such a low cutting speed as V=10m/min, cutting force and coefficient of friction decrease and shear angle increases by using the cutting fluids. The effect of the mineral oil base is greater than the water base. 2. The chip's type is often transformed to flow type from shear type by cutting fluids. 3. The effect of cutting fluids is greater in carbon steel than SUS27 with which the chips easier weld to the tool.
Subjects
機械工学 ( Other)
Languages jpn
Resource Type departmental bulletin paper
Publishers 山口大学工学部
Date Issued 1969
File Version Version of Record
Access Rights open access
Relations
[ISSN]0372-7661
[NCID]AN00244228
Schools 工学部