Research on Pitting Strength uuder Rolling Contact of Gray Cast Iron
Bulletin of the Faculty of Education, Yamaguchi University. Natural science Volume 28 Issue 2
Page 147-159
published_at 1978-09
Title
ねずみ鋳鉄のころがり磨耗強度について
Research on Pitting Strength uuder Rolling Contact of Gray Cast Iron
Creators
Fukui Takashi
Source Identifiers
A study on the pitting resistance of gray cast iron containing about 3.5~3.7% C, which was cast or heat-treatment, was carried out by performing experiments using a Nishihara-type wear testing machine under sliding condition with light oil as a lubricant. The result obtained are summarized as follow. 1) The pitting strength decreases in proportion to the amount of graphite. Flaky graphites remarably lower the pitting strength, especially at high matrix handness. 2) The pitting crack of the flaky cast iron was deeper than the spheroidal cast iron. 3) It was shown that the position of the pitting crack of gray cast iron closely related to the depth of the maximum stress value calculated from the maximum shearing theory. 4) Pitting strength of gray cast iron is mainly determined by the maximum shearing stress.
Languages
jpn
Resource Type
departmental bulletin paper
Publishers
山口大学教育学部
Date Issued
1978-09
File Version
Not Applicable (or Unknown)
Access Rights
metadata only access
Relations
[ISSN]0513-1693
[NCID]AN00243950
Schools
教育学部