Japanese | English

トップページへ戻る

詳細

   
フルテキストURLKJ00004351162.pdf ( 376.9KB ) 公開日 2010-04-19
タイトルMeasuring methods for temperature of the grinding wheel surface
作成者Isobe, Yoshinari
Katoh, Yasuo
Tado, Tamotsu
Kagawa, Masanobu
作成者ヨミイソベ, ヨシナリ
カトウ, ヤスオ
タド, タモツ
カガワ, マサノブ
作成者別表記加藤, 泰生
田戸, 保
作成者所属山口大学工学部
内容記述(抄録等)For thermal analyzing on the grinding phenomenon, it is necessary to measure the temperature of microscopic area in very short time. There are two representative methods, one is the thermocouple method and another one is the infrared radiation thermometer. The new type of infrared radiation thermometer with optical fiber was developed in the response time and the measurable area. The minimum response time was 3×10^<-6>s and the diameter of measurable area was limited to just 110×10^<-6>m. Consequently, this thermometer measured the exact grinding temperature that correlated with calibration curves of S45C, grinding wheel (WA80) and compared with the results of thermocouple(alumel-S45C). The obtained temperature depended on the heat flow rate during the grinding operation and the oxidation of removed chips. The measured signal also indicated two parts, one was the base part and another was the impulse part. The heat energy generated by the oxidation was larger than the total amount of the energy supplied by the grinding operation.
本文言語eng
主題工学
資料タイプtext
ファイル形式application/pdf
出版者山口大学工学部
出版者ヨミヤマグチ ダイガク コウガクブ
NII資料タイプ紀要論文
ISSN0386-3433
NCIDAA0086073X
学内刊行物(紀要等)Technology reports of the Yamaguchi University
掲載誌名Technology reports of the Yamaguchi University
5
3
開始ページ129
終了ページ136
発行日1994-12
著者版/出版社版出版社版
備考本文データは国立情報学研究所において電子化したものである
リポジトリIDKJ00004351162
地域区分山口大学
URIhttp://www.lib.yamaguchi-u.ac.jp/yunoca/handle/KJ00004351162