コンテンツメニュー

Development of newly amorphous Zirconium (Hydr) oxide/MgFe layered double Hydroxide composite for phosphate recovery

DT15100069_Abstract.pdf
[abstract] 5.03 MB
DT15100069_Fulltext.pdf
[fulltext] 11.7 MB
Title
リン回収のための新規アモルファス水酸化ジルコニウム/マグネシウム-鉄系層状複水酸化物複合材料の開発
Development of newly amorphous Zirconium (Hydr) oxide/MgFe layered double Hydroxide composite for phosphate recovery
Degree 博士(学術) Dissertation Number 創科博甲第69号 (2021-09-27)
Degree Grantors Yamaguchi University
[kakenhi]15501 grid.268397.1
Abstract
Phosphorus is an indispensable nutrient to sustain the daily life of all living things on Earth. However, the over-enrichment of the aquatic ecosystem with phosphorus leads to eutrophication, which is still a global environmental problem. More stringent regulations have been put in place for the limit of phosphorus discharge to address this problem and resulted in the removal of phosphorus removal becomes exceptionally crucial. Furthermore, phosphorus deposits are a non-renewable resource and forecasted to deplete until 2170, given the current usage and global population growth. Thus, the removal of phosphorus coupled with the recovery and reuse of phosphorus offer the best strategies to meet the future phosphorus demand.
Accordingly, adsorption represents a fascinating separation technique for phosphate from water because of the possibility of phosphorus recovery. Moreover, this approach has many advantages, such as efficient, easy operating conditions, low sludge production, and the possibility of regenerating the adsorbent. Numerous attractive low-cost adsorbents have been studied for phosphate removal, one of which is layered double hydroxides (LDH). Unfortunately, a high phosphate adsorption capacity of LDH can generally be achieved by calcination, which increases the preparation cost of LDH. In this study, LDH is functionalized with amorphous zirconium (hydr)oxide to obtain enhanced adsorption capacity and eliminate the high-temperature requirement during the synthesis process.
Although different treatment techniques have been developed to eliminate phosphorus contamination, including for wastewater treatment, treated water often fails to meet quality regulations. Amorphous zirconium (hydr)oxide/MgFe layered double hydroxides composites (am-Zr/MgFe-LDH) with different molar ratios (Zr/Fe = 1.5 2) were prepared in two-stage synthesis by the combination of coprecipitation and hydrothermal methods. The synthesis of the composite could eliminate the requirement of high-temperature calcination in the LDH for phosphate adsorption. Moreover, the phosphate adsorption ability of the composite was higher than that of the individual LDH and amorphous zirconium (hydr)oxide. The presence of amorphous zirconium (hydr)oxide increased the phosphate adsorption ability of composite at low pH. The adsorption capacity was increased by decreasing the pH and increasing the temperature (from 290 to 324 K). The bicarbonate (HCO3 ) was the most competitive anion for phosphate adsorption. The pseudo-secondorder model provided the best description of the kinetic adsorption data. Furthermore, the adsorbed phosphate was easily desorbed by 1 N and reused 2 N of NaOH solutions. The results suggest that the am-Zr/MgFe-LDH composite is a promising material for phosphate removal and recovery from wastewater.
A Fixed-bed column has been considered an industrially feasible technique for phosphate removal from water. Besides the adsorption capacity, the effectiveness of an adsorbent is also determined by its reusability efficiency. In this study, phosphate removal by a synthesized am-Zr/MgFe-LDH in a fixed-bed column system was examined. The results showed that the increased bed height and phosphate concentration, and reduced flow rate, pH, and adsorbent particle size were found to increase the column adsorption capacity. The optimum adsorption capacity of 25.15 mg-P g^{-1} was obtained at pH 4. The coexistence of seawater ions had a positive effect on the phosphate adsorption capacity of the composite. Nearly complete phosphate desorption, with a desorption efficiency of 91.7%, could be effectively achieved by 0.1 N NaOH for an hour. Moreover, the initial adsorption capacity was maintained at approximately 83% even after eight adsorption-desorption cycles, indicating that the composite is economically feasible. The am-Zr/MgFe-LDH, with its high adsorption capacity and superior reusability, has the potential to be utilized as an adsorbent for phosphorus removal in practical wastewater treatment.
The possible adsorption mechanisms of phosphate by am-Zr/MgFe-LDH were investigated via X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and pH at the point of zero charge (pHPZC) analyses. It was suggested that the high phosphate adsorption capacity of the composite involves three main adsorption mechanisms, which are the electrostatic attraction, inner-sphere complexation, and anion exchange, where the amorphous zirconium (hydr)oxide on the surface of the layered double hydroxides likely increased the number of active binding sites and surface area for adsorption. This study provides insights into the design of am-Zr/MgFe- LDH for phosphorus removal and recovery in a practical system.
Creators ATIN NURYADIN
Languages eng
Resource Type doctoral thesis
File Version Version of Record
Access Rights open access
Schools 大学院創成科学研究科